AquaController To Mac Serial Interface Cable

In order to connect the AquaController to MacIntosh computer, a serial connection is required. This serial cable is 6 foot long with minidin 8 connectors on both ends.

Be 1st to review

Accessories: See all items

AquaController To Modem Cable

Aquacontroller to Modem Cable

Be 1st to review

Accessories: See all items

AquaNotes 3.0 for Neptune AquaController

AquaNotes is the most advanced aquarium management software available. This software together with an AquaController make an unbeatable combination for aquarium management. AquaNotes Version 3.0 is now shipping! Features of AquaN...

Avg. Customer Review (1) reviews

Accessories: See all items

Direct Connect 4 Module - Heavy Duty

The Direct Connect 4 modules features 4 relay controlled outlets each capable of switching 120V at 12 Amps. The DC4 enables a very reliable hardwired connection between the AquaController and all controlled devices - X10 interfere...

Avg. Customer Review (4) reviews

Accessories: See all items

Direct Connect 8 Module

The Direct Connect 8 modules features 8 solid-state controlled outlets each capable of switching 120V at 6 Amps. The DC8 enables a very reliable hardwired connection between the AquaController and all controlled devices - X10 inte...

Avg. Customer Review (5) reviews

Accessories: See all items

Ground Isolated Serial Connector (for Neptune AquaController )

The ground isolated serial connector (SERIPC9) is used to break ground loops between your PC and the AquaController.  In some installations a ground loop is formed when a serial connection is made and can cause erroneous pH a...

Be 1st to review

Accessories: See all items

Neptune Oxygen Probe with 10 foot Cable

Oxyguard Dissolved Oxygen Probe 0 to 19.9 ppm Lab quality probe w/ 10ft cable Temperature, Altitude, and Salinity Compensation Mini Din 6 Connector PC Serial Cable In order to connect the AquaController to a PC, ...

Be 1st to review

Accessories: See all items

Neptune Systems Aqua Controller 3 Pro (no probe)

The AquaController III Pro base unit contains all the necessary capabilities to monitor and control even the most demanding aquarium setup. All of the features described below are present in the base unit; there are no additional ...

Avg. Customer Review (2) reviews

Multi Item Monitors & Controllers: See all items

Neptune Systems Noise Filter - 15 Amp

This completely blocks X10 signals so you can use to it to isolate a group of devices on a power strip as long as the total load does not exceed 15A.

Be 1st to review

Accessories: See all items

Neptune Systems Signal Bridge

Many homes have a 2 phase 220V power supply which is split into 2 110V legs within the house. Sometimes the X10 signal will not reliably get from one leg of the 110V wiring to the other leg of the 110V wiring. The signal bridge is...

Be 1st to review

Accessories: See all items

Serial Interface Cable For PC (for Neptune AquaController )

In order to connect the AquaController to a PC, a serial connection is required. This serial cable is 6 foot long with a minidin 8 connector (plugs into the AquaController) on one end and a female DB9 connector on the other. If a ...

Avg. Customer Review (4) reviews

Accessories: See all items