High-Tech, High Volume Ultra-Pure Water with 99.95% Silica Removal and Extended DI Cartridge Life.
DI WATER at HALF the COST!
Ultra-high purity water (18.2 megohm-cm resistivity) at an very economical price; water purification systems maximizing pure water production through application of the laboratory grade deionization resins used in our specialty deionization cartridges
- "New" Spectra Membranes have 98.0+% avg. rejection and produces 90 GPD, 180 GPD
- New Super Capacity 2-stage Deionizer
- First Stage revolutionary MAXCAP DI™ with 3.5x capacity of other mixed-beds
- Lower your DI production costs by over half!
- Second DI stage is the DI cartridge that pioneered silica removal—SpectraPure®`s Silica-Buster Cartridge.
- The best pre-filtration available:
- Ultra-high efficiency 0.5 micron Sediment Pre-Filter. Our best sediment filter for improved particle removal and long term performance. Not a cheap import.
- 1/2 micron Carbon Block Pre-Filter with a 20,000 gallon chlorine removal capacity. Our best carbon block Chloramine eater. All the carbon block you ever need, period.
- Clear housings and pressure gauge
- TWO Dual Inline TDS meters, one to monitor RO Membrane performance and one to monitor MAXCAP and Silica-Buster performance to signal change required.
- Filter wrench
- Effective on well water and colloidal silica
- Dimensions: 20" x 7" x 16"
SpectraPure®® MAXCAP RO/DI™ Systems incorporate the Spectra tested Membrane that produces 150 GPD or 300 GPD. Used in combination with our MAXCAP DI ™ and silica-removal deionizing cartridges, this system provides the ultimate removal of algae promoting substances, including colloidal silica, and the longest deionizing cartridge life, significantly reducing the cost of operation. This is water purification at its best, an RO/DI system designed to continuously produce economical ultra-pure water.
Dual stage DI for true “18.2 meg-ohm resistivity laboratory grade water” . This super capacity DI system consists of a newly developed MAXCAP DI ™ Cartridge, with over three times as much contaminate removal capacity as in previous designs. The final stage consists of our Silica-Buster DI cartridge, with two, dual inline electronic purity monitors to determine the performance of the RO membrane as well as the DI exhaustion points. While competitors claim ZERO TDS, don`t be fooled by limitations of most inexpensive DI Systems. Besides, it just makes sense… two stages of high quality DI cartridges definitely will produce higher purity water more reliably over the life of the cartridges than any single stage.
The MAXCAP RO/DI™-150 is available with one FilmTec™ 90 or with two 150 GPD Membranes (-300).
MAXCAP RO/DI™ Systems are equipped with the finest pre-filtration 0.5 micron MicroTec™ pre-filters, and 20,000 ppm-gallon chlorine/chloramine capacity carbon block pre-filters. Clear filter housings and a standard pressure gauge provide better visibility of system performance. No more guessing about plugged pre-filters. Also included is a filter wrench and a 3/4” garden hose adapter.
Our premium grade filters (as used in the MAXCAP RO/DI™) are a significant upgrade in performance and capacity. Each of our premium grade filters has been extensively tested in the worst case locations to insure performance, capacity, and reliability. If you have excellent tap water (a rarity these days, but it still happens in some places in the US ) you may be able to scrimp on pre-filtration, but we see that as the exception in most locations, and thus recommend you purchase the best pre filtration you can afford. As important as pre filtration is to removal of contaminants and the life of your expensive RO membrane (and subsequently the life of your DI cartridges) we think that for ultimate performance and lower cost of ownership over the production life of your membrane that you should always use the best pre-filtration available.
Caution: DI cartridge life is greatly reduced when operated on low pH waters or water with high CO2 levels. Aeration or de-gassification of RO product water is recommended for removal of carbon dioxide prior to the DI section.
|
|
|
|
Customer Reviews
|
Write a review
|
6 of 6 people found the following review helpful:
|
Excellent!
|
|
Cant Ask for anything better!!
by ReefTanker
|
|
Experience Level: Intermediate
|
|
Posted on 5/23/2008
|
|
|
Comments: I use to have the Kent Marine H-S RO system and thought that was a pretty good system until I got this. The 2 TDS meters show you exactly what is going on and lets you know exactly what filters are going out.
The kit is well thought out, very easy to use and the instructions are very detailed and easy to follow.
I have the 90gpd and it streams water. My water starts out and around 400 TDS at start and leaves the filter at absolute ZERO!
For the money, I can’t imagine a better RO system on the market.
Yes, I would recommend this product to my friends.
|
3 of 3 people found the following review helpful:
|
|
Excellent!
|
|
Excellent
by GregL
|
|
Experience Level: Intermediate
|
|
Posted on 3/5/2009 from ISSAQUAH, WA UNITED STATES
|
|
|
Comments: I have had this for nine months and I really like it. I like the gauges and TDS meter to check condition of filters. Never had any problems. If you buy this, be sure and pick up the shut off value to the reservoir part SP5131. I had a flood and this accessory worked great.
Yes, I would recommend this product to my friends.
|
|
|
|
Similar Items
|
|
|
|
Product:
|
|
List Price:
|
|
Our Price:
|
|
|
|
Rating:
|
|
Item Code:
|
|
Description:
|
|
|
|
|
|
|
Puratek RO/DI Filter System
|
|
N/A
|
|
$299.99 to $448.99
|
|
|
|
|
|
Puratek 100GPD RO/DI System Marine systems have proven to be one of the most fragile mini ecosystems /Biotopes to maintain. Numerous variables need to be considered & maintained in a tight
|
|
|
|
|
|