Neptune Systems EnergyBar 8
The EnergyBar 8 module from Neptune Systems features 8 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power bar far better than any competing units.
- 8 independently controllable 120V Outlets (Max 5 Amps, total current must be less than 15 Amps)
- Plug and Play
- Built-in 6 Port hub so that accessories can be easily added
- Less than $20.00 per controllable outlet (Best in Industry)
- Active electrical current monitoring and logging
- Fail-safe features. On communication failures outlets revert to user settable default settings
- High reliability direct wired connection to the Apex System(does not use X10)
- Completely Silent Operation on 6 of the solid state switched outlets
- Two of the outlets use mechanical relays for switching
- "Soft-Start" for reduced pump wear
- Up to 240 EB8s can be daisy chained together for up to 1920 switched outlets
- All 8 outlets independently controllable
- Built-in circuit breaker Protected
- 4 Mounting Holes for easy installation
- Compact custom aluminum enclosure (10.0" x 3.75" x 1.8")
So Much More Than Just a Power Strip!
The Energy Bars available for Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal!
It is obvious that this component is key to controlling things on your aquarium, but what is not so apparent is how it is critical to preventing catastrophe in your aquarium. Here’s how:
Let’s Start with Construction
Neptune Systems put a lot of thought into the construction of their Energy Bars. Unlike their competitors and simple power strips, Neptune Systems Energy Bars are made out of 16 gauge, powder-coated aluminum. They are built to be bullet proof – almost literally!
Other controller companies use slick, inexpensive plastic enclosures, but they do not provide you with the best protection against catastrophic failure. You see, plastic timer powerstrips and power bars can easily catch fire should saltwater enter them and cause a short. With Neptune Systems solid metal Energy Bars, if such a short did occur, it would be far less likely to spread to the tank or your home.
Each of the independently controlled outlets on the Energy Bar is independently switched and easily carry the current load specified on the label. In fact, Neptune Systems intentionally underrate their outlets just to provide that extra level of security. So, depending on which Energy Bar you purchase, each outlet is rated from 5A to 10A at 120V AC or 8A on our 240V European model.
Current Sensing Device
The Energy Bars continually send their information on their present current drain to the Apex controller. This is incredibly useful information for a number of reasons. First, it enables you to recognize what the overall power consumption is on any Energy Bar so that you can better distribute the load across your multiple Energy Bars. Also by having this feature you can accurately determine the power utilization of your tank to compare different lights, pumps, protein skimmers, etc. (Not available on Energy Bar 6)
Soft-Start Extends the Life of Pumps
Imagine revving the engine in your car and dropping the shifter from P to D. That is exactly what happens when many controllers turn on the power to your pumps. Just like in a car, this kind of instantaneous application of power to your return pump after a feed cycle or to your powerheads will certainly lead to early failure. With the Energy Bar, power is slowly ramped on so that every motor is safely brought up to speed without the damaging torque.
Power Failure Detection, Communication Error Protection and Pre-programmed Failsafe State
Each Energy Bar outlet can be configured to be either in an off or on state if the power were to fail and then come back on or if there was a communication failure with the Apex base unit. This means that if, for instance, your heater was on when the power went off, you could have it programmed to be off until control was reestablished with the Apex base unit. Or, as another example, you could program your main return pump to always be in the on position in case of failure.
This feature is very important as many other controllers on the market may leave the outlet in its last position or possibly default all of the outlets to off or on. This is even true if they simply lose communication with their base unit due to a system failure, software bug, communication issue, lightning strike, etc. Not good! Imagine if you were away from home and a storm took out your Apex – the Energy Bar would just fall back to the Failsafe state you had programmed for such an incident. No worries.
One additional advanced feature is that when you use an additional Energy Bar on a UPS (uninterruptible power supply) you can have key lifesaving devices (low-power powerheads and bubblers) on there that will automatically go into their Failsafe State once power failure is detected. This can keep your tank alive and healthy for hours on a good UPS until the power comes back online. This will run completely unattended and is ideal to give you peace of mind when you are away from home whether out for the evening or on a two-week cruise!
It is easy to see the importance of this one small feature that differentiates the Neptune Systems Energy Bars from the rest and how once again Neptune Systems is looking out for every possible way for you to avoid catastrophe in your aquarium.
Extra AquaBus Connections
Each Energy Bar has additional connectors so that you can easily expand to other modules. This is very helpful for those that want to use one Apex to control multiple aquariums. The Energy Bar becomes an AquaBus “hub” at any location you choose – allowing you to connect more modules in that area. This is called a “star topology” and is unique to the Apex. Many other controllers require you to daisy chain together every module or they require you to buy a separate “hub” to connect everything together.
When you connect Apex Ready
certified products to your Apex System, many new options will unfold. How about having your LED lights dim or change color temperature at the touch of your iPad? How about programming your Tunze or VorTech pumps for some serious wave action? That’s what you get when you pair up the Apex System and an Apex Ready certified product.
Product Manuals & Documentation
Neptune Systems Aquarium Supplies
Neptune Systems is one of the world’s leading manufacturers of aquarium controllers. The company was founded in 1995 for the purpose of developing affordable water quality monitoring and control instrumentation. Their engineering team has extensive expertise in computer hardware and software system design as well as a background in water quality analysis. Neptune Systems uses these finely-honed engineering skills to develop innovative monitoring and control solutions for use in reef and fresh water aquariums, aquaculture tanks, hydroponics systems and general laboratory use. Neptune Systems is best known for their AquaController line. The company is known for their innovation and customer centricity.
We ship 99% of the products we carry for free within the contiguous United States using a mix of economy methods including USPS First Class Mail, SurePost and UPS Ground. Your order will arrive in 5-7 business days.
Over 90% of our members receive their orders within 2 business using UPS Ground. Upgrade from free economy shipping to UPS Ground for only $4.99—or spend $299 and we’ll upgrade you automatically!
Expediated shipping services are available for most products if you are in a hurry. Get guaranteed delivery in 2 business days, 1 business day, or next day by 10:30 am. Costs vary by location.
Same-day shipping is available Monday-Friday for most products—place your order by 10 am PST. Pre-ordered and back-ordered items do not qualify, nor do drop-shipped, live, or frozen shipments.
Learn More About Shipping
Return any new and unused item within 60 days for a full refund. Having difficulty with a product? Contact us to speak with an aquarium expert. If you need a replacement, fill out this form.
A small segment of the 180+ brands we carry require that customers contact them directly if/when problems arise. You can view the full list of those brands and get their contact info here.
Marine Depot is an authorized reseller for every product we carry. That means when you buy aquarium supplies from us, your products are not only backed by our own 60-day return policy, they also carry full factory warranties, where applicable. Some items have a 1-year warranty, others have limited lifetime warranties. Warranty coverage varies from manufacturer to manufacturer, so please read the product description of the item(s) you are considering thoroughly for details or contact us if you have warranty questions.
Learn More About Returns
Rack up reward points to earn discounts on future purchases! You can earn reward points by creating an account, writing reviews, referring friends, subscribing to our newsletter, buying products, and more!
- Most Products
Earn 5 reward points for every $1 you spend to get 5% cash back
- Marine Depot, AquaMaxx, Accel Aquatics, and Korallin
Earn 6 reward points for every $1 you spend to get 6% cash back
- Aqua Illumination, EcoTech Marine, Nano Box, Neptune Systems, NYOS, Oceanbox Designs, Pax Bellum, and Reef Glass
Earn 1 reward point for every $1 you spend to get 1% cash back
You can also get bonus reward points by purchasing select items during special sales and promotions.
Learn More About Rewards