Purity Meters and Monitors for RO & RO/DI Systems

Want to know if your Reverse osmosis system is working well? Measure reverse osmosis system performance with a TDS meter and reverse osmosis pressure gauge.

There are three basic ways to measure the performance of a reverse osmosis system. Membranes are rated in GPD (gallons per day). A 100 GPD membrane will make about 4 gallons of product water an hour in ideal conditions. An inline TDS meter measures the total dissolved solids, or TDS, in water that passes through the system. A TDS tester can tell you the purity of water at every stage. Pure water has 0 TDS. An RO pressure gauge measures the pressure in PSI going through the RO system. As the prefilters clog, pressure drops, letting you know it is time to change your carbon and sediment filters. A chlorine test kit can be used on the product water to ensure chlorine has been removed.
8 Results
Dual Inline TDS Meter DM-1 - HM Digital

Dual Inline TDS Meter DM-1 - HM Digital

TDS Calibration Solution

TDS Calibration Solution

Triple Inline TDS Meter TRM-1 - HM Digital

Triple Inline TDS Meter TRM-1 - HM Digital

Deluxe Dual Inline TDS Meter DM-2 - HM Digital

Deluxe Dual Inline TDS Meter DM-2 - HM Digital

Titanium One Digital Inline TDS Meter - Auto Aqua
new

Titanium One Digital Inline TDS Meter - Auto Aqua

Titanium S1 Digital Inline TDS Meter with One Probe Sensor - Auto Aqua
new

Titanium S1 Digital Inline TDS Meter with One Probe Sensor - Auto Aqua

Loading...