Mon-Thurs 7am-5pm PST
Fri 7am-4pm PST

Questions about products, orders, shipping?
Contact us by call or email

HYDROS Control Water Solenoid Valve (DC 12V) - CoralVue

HYDROS Control Water Solenoid Valve (DC 12V) - CoralVue


Item #: CV21199

In Stock

**Please note the Solenoid Valve is an accessory for the HYDROS Control line by CoralVue. A HYDROS controller (& open Drive Port) is required to use this item.**

HYDROS DC Solenoid Water Valve

The HYDROS DC Solenoid Valve is a handy HYDROS Control 2 and Control 4 accessory that provides easy on/off RO or RO/DI water flow. You can connect the solenoid to your reverse osmosis filter and use it to top-off your tank if you don’t have the room available for a separate ATO reservoir.

  • Can be used for water top-offs when you don`t have room for a separate ATO reservoir
  • Max Pressure: 120 PSI
  • Uses a GX12 aviation-style connector so the Control 2 and Control 4 maintain their IP65-rating (dust-tight and protected from water spray at any angle).
  • Powered and controlled by plugging into a Drive Port on the HYDROS Control 2 or Control 4. No additional power cord is required.
  • Manufactured by AutoAqua, an official HYDROS Technology Partner.

The HYDROS DC Solenoid Valve works in conjunction with a HYDROS aquarium controller and an optical or mechanical water level sensor (such as the HYDROS Water Level Sensor). When the sensor detects the water level is low, it opens the valve to allow fresh RO or RO/DI water to flow through and top-off your tank or sump. When the sensor senses that the water level is replenished, it will tell the Control 2 or Control 4 to shut off power to the solenoid. This closes the valve to stop the flow of reverse osmosis water. The HYDROS DC Solenoid Valve should be connected to the product line coming off your reverse osmosis system. It has 1/4" push-connect fittings to insert standard RO tubing quickly and easily.

Instead of using the HYDROS DC Micro Pump as your ATO pump, you can use the HYDROS DC Solenoid Valve instead. Just plug it into a Drive Port on the Control 2 or Control 4 for power and control and configure in the HYDROS app. It is recommended to install an auto-shutoff valve and check valve on your reverse osmosis system to prevent it from producing wastewater when the solenoid is closed.

DC Solenoid Water Valve Specifications:

Max Pressure: 120 PSI
Input/Output: Push-connect fittings for standard 1/4" RO tubing
Voltage: DC 12V
Connection: Drive Port on HYDROS Control 2 or Control 4

Manufacturer information

CoralVue Aquarium Supplies
CoralVue, founded in 2002, provides high-quality aquarium lighting at prices any hobbyist can afford. The company was formed by David D’Aquin, an underwater video and lighting expert who has teamed with commercial divers, the U.S. Navy and National Geographic on a variety of projects. D’Aquin took his knowledge of lighting and electronics and focused these passions on creating products for the aquarium industry. In just a short time, CoralVue pioneered the development of the 400-watt double-ended metal halide bulb and the unique color temperature spectrum of ReefLux metal halide bulbs. CoralVue also develops high-quality electronic metal halide ballasts to power their bulbs. They offer ballasts in single, dual, triple and dimmable lamp models. To compliment their line of lighting products, CoralVue entered the protein skimmer and calcium reactor market in 2004.

0 Reviews

Be the first to review

We use cookies to provide a personalized site experience. By continuing to use & browse this site, you agree to our Privacy Policy.