1-714-385-0080

Mon-Thurs 7am-5pm PST
Fri 7am-4pm PST

Questions about products, orders, shipping?
Contact us by call or email
customercare@marinedepot.com

Kent Marine Phosphate Sponge 1 Quart

Kent Marine Phosphate Sponge 1 Quart

$13.99 


Item #: KM9151

Select a Size:


In Stock

Description:
Kent Marine Phosphate Sponge is not an algaecide, but a ceramic medium which will adsorb phosphates quickly (within hours) when placed directly in the water flow. Works in fresh and saltwater aquariums or ponds to bring about 1.0 ppm of phosphate or silicates down to less than .05 ppm in a 120 gallon tank for every dry quart of medium. For silicate to be removed, phosphates must first be removed. Beads are cracked to expose more surface area and increase efficiency! This product will not release soluble aluminum compounds into your aquarium, causing negative reactions from your inverts, as competing products may. Will also absorb moisture for use as an air dryer for ozone, and can be renewed over and over in moisture removal service!

Directions:
Rinse with fresh water (preferably reverse osmosis or deionized water) WARNING: PRODUCT MAY GET VERY HOT THE FIRST TIME IT IS WET! Use rubber gloves and/or place in a plastic container while rinsing! Place in a large mesh bag (800 micron) or a canister filter, directly in the water flow. Make sure water flows through the material and not just around it. Leave for 8 hours to 2 days maximum (as with any phosphate adsorber, phosphates can be re-released into the system if initial charge is left in the system continuously. If you want to leave in the system to keep phosphates low or to remove silicates, replace initial charge with brand new, and change on a regular basis.) For silicate removal, phosphate must first be removed, then a new charge of Phosphate Sponge must be left in the system for several days.

Considerations for use:
Many municipal water companies add phosphates to the tap water to assist in controlling lead consumption by humans. Sodium Silicate (water glass) is also added to help reduce pipe corrosion. Phosphates and silicates also naturally occur in rivers and lakes. Phosphates and silicates are nutrients or fertilizers which, given proper lighting and other nutrients, will promote rapid growth of undesirable algae, diatoms and cyanobacteria. When used as directed, Phosphate Sponge will lower the levels of these fertilizers to help reduce growth of these unsightly nuisances. Successive replacement of charges of Phosphate Sponge may encourage a die off of hair algae!

Renewal:
For phosphate removal, renewal may or may not be possible, depending on conditions of use. At best, product may be renewed two times, depending on circumstances of use, and capacity will be much lower each time. To renew, spread 1/4" thick on a baking pan. Place in a 450 degree oven for one hour. Let cool. Rinse with fresh water and re-use. When reusing, leave for 8 hours, maximum. Do not use pan for food.

Precautions:
WARNING: PRODUCT MAY GET VERY HOT THE FIRST TIME IT IS WET! Use rubber gloves and/or place in a plastic container while rinsing!

Manufacturer information

Kent Marine Aquarium Supplies
Kent Marine was established by aquatic hobbyists who saw a need for products that aid the user in creating the most natural enclosed marine and freshwater environment possible. From vitamin and mineral supplements to nutritional products and filter media, Kent Marine set the benchmark and was one of the first in the aquatic industry to provide these unique solutions. For the past 15 years, Kent Marine has been committed to providing effective ways to keep beautiful, healthy aquariums. Through continuous research, testing and development, new products like salt mix, scrapers and reverse osmosis filtration were brought into the Kent Marine family.

5 Stars


milton38

Reviewed on
March 31, 2019

Yes, I would recommend this.

Works very good

Pros: Easy to use not need a reactor

Cons: None

I like this product to reduce my phosphates works very fast to lower phosphates

Was this review helpful? 0 0


milton38

Reviewed on
March 31, 2019

Yes, I would recommend this.

Works fast to lower phosphates

Pros: Fast to lower phosphates

Cons: Non

Very good product to lower you phosphates fast

Was this review helpful? 0 0


ray

Reviewed on
September 28, 2017

Yes, I would recommend this.

Fantastic Product

Pros: works, fast, easy, doesn't clog.

Cons: Wish there was a larger size than 2qt available.

I have been doing fish only for a long time and decided to do reef. Of course my phosphates where high around 4 +. This has been steadily reducing them. I am hoping that once the phosphate is down I can go to something more traditional so I don't have to remove it after 36 hours which is what I have been shooting for.

Was this review helpful? 0 0


mike

Reviewed on
May 23, 2017

Yes, I would recommend this.

Works OK

While this does reduce my phosphate level, it doesn't seem to reduce the phosphate level as much as advertised.

Was this review helpful? 0 0


jefferey haugen

Reviewed on
December 08, 2016

Yes, I would recommend this.

Great product

Great product, removed 2.0 in phosphate in a 90 gallon tank in 44 hours. Great product. Thanks

Was this review helpful? 0 0


harold mccampbell

Reviewed on
March 13, 2015

Yes, I would recommend this.

Great product

When you need to get phosphate down quick this will do it!

Was this review helpful? 0 0


kevin morgan

Reviewed on
August 12, 2014

Yes, I would recommend this.

Phosphate Sponge

I finally found a product the produces results as advertised. I've been having problems with high Phosphates in my fresh water aquarium for years. I've tried a lot of different 'remedies' but this is the first one to actually work.

Was this review helpful? 0 0


john werbick

Reviewed on
July 18, 2014

Yes, I would recommend this.

Phosphate Sponge

Did what it stated it would. dropped my phosphates like a rock. 0.5ppm to 0.0 in 3 days. was also very easy to use. I used it in a phosphate reactor.

Was this review helpful? 0 1


andrew burkert

Reviewed on
May 29, 2013

Yes, I would recommend this.

Super Sponge

I have a 210 with a 35 gal sump/ref. 14 large fish and lots of corals and inverts. My Phosphates were out of range 2.5+++ I purchased 2 - large jars of Kent Marine Phosphate Sponge and put the product into my reactor and changed it every 24 hours. I cooked as described. Currently on my 2nd cook. I noticed a difference after the 1st treatment. I am on my 4th day and Phosphates are down to .54 the water is clear and all inhabitants look happy. I have tried other products over the years but this one really works as stated.

Was this review helpful? 1 0


piotr kulesza

Reviewed on
May 20, 2013

Yes, I would recommend this.

Great Product

Great Product, I use it in the CPR tumbler and it works great, as many have said before use according to the directions. If you have really high phosphates take it out closer to the 8 hour min. and if lower then you should leave about 24 hours.

Was this review helpful? 0 0


We use cookies to provide a personalized site experience. By continuing to use & browse this site, you agree to our Privacy Policy.