1-714-385-0080

Mon-Thurs 7am-5pm PST
Fri 7am-4pm PST

Questions about products, orders, shipping?
Contact us by call or email
customercare@marinedepot.com

Korallin Lid with pH Probe Port for C-1502/3002

Korallin Lid with pH Probe Port for C-1502/3002

$65.99 


Item #: KL3123

Ships Free!


Temporarily Out of Stock


The design of the Korallin reactors is all about ease of use so that once they are set-up they are simple to adjust to get the best performance. In the most exacting environments for example where the tank is filled with fast growing acropora or sps corals. Calcification rates in this type of tank may run as high as high as 15-20kg per square meter per year. It is useful to be able to control the internal pH of the reactor so that it is set to the optimal level to dissolve the media. So we can know offer an upgraded reactor lid with a watertight gland for fitting a pH probe. The new lid also offers greater visual display of gas level in the reactor. The probe would normally be connected to a suitable electronic controller such as those made by Aqua Medic or complete systems like the IKS computer. Once this happens it is a simple matter of dialing in the pH you require and then the controller will add the correct amount of gas to maintain this via a solenoid valve. Simply adjust the water flow to meet your calcification needs and the correct level of gas will be supplied to maintain constant dissolution of the media.

Korallin C1501 Lid Upgrade

Manufacturer information

Korallin
Korallin is a German based company who is a manufacturer of specialized aquatic components and accessories for the advanced marine aquarist.

5 Stars


alex

Reviewed on
February 13, 2018

Yes, I would recommend this.

excellent article

Pros: does not have any water leak works perfect

Cons: Any

It works perfect

Was this review helpful? 0 0


daniel garcia

Reviewed on
June 27, 2015

Yes, I would recommend this.

Korallin lid with PH port

Great item thanks

Was this review helpful? 0 0


joseph lubrano

Reviewed on
May 12, 2013

Yes, I would recommend this.

Korallin Lid

The lid was the right part and delivery came earlier than estimated. thanks

Was this review helpful? 0 0


mike

Reviewed on
April 15, 2013

No, I would not recommend this.

Buy Teflon Tape

I bought this lid as I was converting my 1502 from a denitrate to calicum reactor and wanted the ph port. If you buy this get some Teflon tape to go with it. The older lids had a gray outlet port. The new ones have a blue port. They leak and will not tighten unless you remove them and wrap the threads with lots of tape. The same goes if you buy in inlet port with bubble counter. Once I got passed these two items the product works great. I am disappointed with Korallin on the new parts they are using.

Was this review helpful? 2 0


mike cusick

Reviewed on
February 02, 2012

Yes, I would recommend this.

c-3002 lid

Th e probe holder is somewhat cramped in close to the other fittings on the lid, but it seems to work just fine

Was this review helpful? 0 0


ed

Reviewed on
August 11, 2010

Yes, I would recommend this.

Necessary accessory

Unfortunately, the probe port does not come with the Korallin unit when purchased, so you have to purchase this accessory. Even though the Korallin unit states it does not need a port, I would purchase this to be on the safe side.

Was this review helpful? 0 0


dave quaresima

Reviewed on
March 11, 2010

Yes, I would recommend this.

Should Have the Option

Korallin makes a great product and the lid is just as good as the reactor. I do have a suggestion to Korallin, the ph port should be moved back away from the other ports. It's location makes it difficult to make any adjustments if you should have any leaks. My other suggestion would be that Korallin should offer you the option of which lid you would like when you purchase the reactor.

Was this review helpful? 3 0


frank knight

Reviewed on
December 25, 2009

Yes, I would recommend this.

korallin ph probe li

it was everything i wanted it to be. great replacement lid for your korallin calcuim reactor if you are running a pH controller.

Was this review helpful? 0 0


the latino reefer

Reviewed on
May 23, 2009

Yes, I would recommend this.

My Review

Its a great product. This product its build in a high quality level. The only down fall is that i wish the probe port was easir to get too and not have to remove the pump all the time to get probe out.

Was this review helpful? 0 0


gregory box

Reviewed on
May 15, 2009

Yes, I would recommend this.

korallin Lid With P/H

This is a must product, I was using a drip cup and it kept falling off the sump. So I decided to purchase the lid with the p/h holder best decision i made.

Was this review helpful? 0 0