The original product that established the state-of-the-art in water conditioning technology regarding ammonia removal.
- A true one-step liquid ammonia and chloramine remover
- Simple to Use
- The original product that established the state-of-the-art in water conditioning technology regarding ammonia removal.
- 16oz bottle - treats 960 gallons
To avoid confusion it should be recognized that there are two products with the Amquel name - the original AmQuel and the recently improved product AmQuel+. AmQuel+ does all that AmQuel does and a significant number of additional tasks as well. See in "ABOUT CONDITIONERS " the section "Comparison Between AmQuel and AmQuel+".
Kordon AmQuel, developed about 20 years ago, is the original product that established the state-of-the-art in water conditioning technology regarding ammonia removal. AmQuel quickly and effectively removes ammonia, chlorine and chloramines (three of the most toxic chemicals commonly found in aquatic systems) from freshwater and salt water. AmQuel is the first to be a true one-step liquid ammonia and chloramine remover that is simple to use. AmQuel is completely unlike dechlorinators which claim to "remove" chloramines. These products only break the chlorine-ammonia bond of chloramines by simple dechlorination, leaving the ammonia in the water. The resulting ammonia must be removed by bacterial action which can take days or weeks or by adsorption on granular or powdered zeolites (clinoptilolites). In addition, AmQuel functions as well in salt water as it does in fresh water; whereas zeolites do not remove ammonia in salt water.
Contains 100% sodium hydroxymethanesulfonate.
DOSAGE WITH LIQUID AMQUEL PRODUCTS:
The "Standard Dose" of AmQuel is one teaspoon (5 ml) per 10 gallons of fresh or salt water, or one liquid ounce (30 ml) per 60 gallons of water, or one cup (8 liquid ounces - 20 ml) per 480 gallons of water. For other measurements estimate the amounts needed, such as 1/4 teaspoon for 2.5 gallons of water, or 3 teaspoons for 30 gallons, etc.
- To remove chlorine and chloramines (chlorine combined with ammonia) out of the tap from public water supplies add one Standard Dose (see definition above) to the water to break the bond between the chlorine and ammonia, and to remove all the chlorine, and ammonia that may be in public water supplies. This will remove up to 3 mg/L chloramines (as monochloramine, NH2Cl). No greater dose is needed for removing chloramines or chlorine from public water supplies.
- To remove toxic ammonia compounds that build up in aquariums and ponds from the excretion of body wastes by fishes, invertebrates, bacteria, and other aquatic organisms start with a Standard Dose (see definition above). This Standard Dose not only removes the chlorine and chloramines described above, but will also remove (detoxify) at the same time 1.0 mg/L (= approx. 1.0 ppm) of all ammonia compounds in fresh or salt water. Use multiple doses to remove more than 1.0 mg/L ammonia from the water.
It is suggested that the ammonia concentration of the water be tested prior to the addition of AmQuel to determine how much AmQuel is needed. Also see Contraindications for when there may be problems in the use of AmQuel). [sentence relocated] The pH of the water being treated affects the speed at which AmQuel removes ammonia. The lower the pH, the slower AmQuel works. At a pH of 7.0 (neutral) AmQuel will remove the ammonia in less than 5 minutes. Several minutes more are needed at higher pHs.
- To remove toxic nitrite, nitrate and other organic compounds that build up in aquariums and ponds from the excretion of body wastes by fishes, invertebrates, bacteria, and other aquatic organisms use AmQuel+.
AmQuel is stable indefinitely when stored in a cool, dark area away from heat and direct sunlight. AmQuel must be kept tightly closed when not in use.
AmQuel is harmless to plants, fishes and invertebrates. This product is safe for use in aquariums and ponds and will not interfere with normal biological filtration. AmQuel is compatible with NovAqua and PolyAqua. Use caution when adding liquid AmQuel to water that has a poor buffer reserve (as indicated by problems maintaining a stable pH). Using AmQuel in these conditions can cause a sudden lowering of pH. To prevent a pH drop, use either AmQuel Plus Buffers or Amquel+. AmQuel may affect the dyes in certain types of cotton fabrics. This happens for the same reason that Ammonia test kits using the Nessler reagents do not work with AmQuel or AmQuel+. These products reduce the coloring agents used in the Nessler reaction test kits, and apparently in a very small selection of cotton based fabrics.
AmQuel should not be added to water containing active, therapeutic dosages of chemical dyes such as methylene blue, acriflavine, potassium permanganate or malachite green, since AmQuel will interfere with their proper performance. Combining AmQuel with these dyes will not result in toxic chemical by-products. AmQuel is compatible to use with all water quality test kits except for the ammonia test kit that uses Nessler reagents that read in shades of amber or yellow, and the oxygen kit that uses Winkler reagents. Residual AmQuel and its reaction products are incompatible with the Nessler and Winkler-type test reagents, resulting in false, high ammonia and low oxygen concentration readings. All other types of test kits produce accurate test results, such as ammonia test kits using salicylate-type reagents. Kordon`s AquaTru Test Kit #35970 for salt water and #35980 for fresh water are recommended for accurate test results. AmQuel will temporarily (for approximately 12 hours) lower redox. (For more information see "About Conditioners")
TOXICITY:AmQuel is non-toxic when used as directed. Over the past twenty years thousands of species of freshwater and marine fishes, invertebrates and plants have been exposed to AmQuel with no toxic effects. It does not reach toxic levels even in cases of accidental or purposeful overdosing. AmQuel is non-toxic to humans and no special precautions are necessary in handling this product.
DRY AMQUEL + BUFFERS:
There are two Dry AmQuel+Buffers products: no. 31643 4.5 oz, and no. 31648 10 oz. These products provide AmQuel with the buffers needed to keep the pH from becoming more acidic due to the acidity of the AmQuel formulation. (See also AmQuel+, which does not require buffering in its use).
PURE DRY AMQUEL:
AmQuel is available in bulk pure dry form for professional and commercial use. See the section on AquaVet for listings and further information.
DIRECTIONS FOR USE:
As a general rule, when using tap water in which chlorine and chloramines are present, but not nitrites, nitrates or other organics -- then it is safe to use the less expensive AmQuel. If there is the possibility of nitrites, nitrates and other organics being involved, then Amquel+ is recommended.
AQUARIUMS AND PONDS:
When using AmQuel with tap water, add AmQuel to water at the recommended dosage to remove ammonia, chlorine and chloramines. To fully condition tap water, add NovAqua as well. Use AmQuel or AmQuel+ and NovAqua each time a water change is made. If the tap water contains both ammonia and nitrite (this is becoming more common in public water supplies) then AmQuel+ should be used instead of AmQuel. Also see AmQuel+ as to when it should be used.
FISH AND INVERTEBRATE SHIPPING AND HOLDING:
AmQuel or AmQuel+ and NovAqua should be added to tap water used for shipping fish and invertebrates. If the fish are crowded or prone to bump into or abrade each other, PolyAqua should be added to both the shipping water and the aquarium or holding tank after shipments are received. NovAqua and AmQuel, when used together, will reduce stress, osmotic and pH shock, probability of infection, and neutralize ammonia, chloramines, chlorine and heavy metals. PolyAqua should be used to handle abrasions, bruises, and frayed fins of fishes.
FISH AND INVERTEBRATE FIELD COLLECTIONS:
When using water from natural conditions for field collecting the use of AmQuel in holding and shipping water will reduce stress in fishes and invertebrates due to ammonia intoxication. If fish will be held for days in containers, AmQuel+ should be used, because it will remove (detoxify) nitrites and nitrates as well. In addition, PolyAqua should be used in holding and shipping water for optimum protection against abrasions, bruises, and frayed fins in fishes.
Product Manuals & Documentation
Kordon has been supplying aquarists and pond keepers with the products they need since the 1960`s. They are dedicated to developing the right products along with the right documentation to back up those products. All Kordon aquarium products are carefully researched and tested prior to their release. Quality control is constantly maintained in their production and distribution.
Most orders under $39 ship for only $5.99 using a mix of economy shipping methods including UPS Ground, USPS First Class, and/or SurePost. Your order will be delivered in up to 7 business days after it ships out.
We ship 99% of the products we carry for free within the contiguous United States using a mix of economy methods including USPS First Class Mail, SurePost and UPS Ground. Your order will arrive in up to 7 business days. Just spend $39 or more!
Over 90% of shoppers receive their orders within 1-2 business days. Upgrade from free economy shipping to faster shipping for only $5.99—or spend $250 and we'll upgrade you automatically!
Expedited shipping services are available for most products if you are in a hurry. Get guaranteed delivery in 2 business days, 1 business day, or next day by 10:30 am. Costs vary by location.
Same-day shipping is available Monday-Friday for most products—place your order by 10:30 am PST. Pre-ordered and back-ordered items do not qualify, nor do drop-shipped, live, or frozen shipments.
We ship live plants, live foods, and frozen foods within the contiguous United States. Each of these categories is subject to its own $19.99 flat-rate shipping fee to cover the special packaging and/or expedited shipping costs required to ensure safe delivery. Orders with 12+ live plants ship free!
Learn More About Shipping
Return any new and unused item within 60 days for a full refund. Having difficulty with a product? Contact us to speak with an aquarium expert. If you need a replacement, fill out this form.
A small segment of the 180+ brands we carry require that customers contact them directly if/when problems arise. You can view the full list of those brands and get their contact info here.
We are unable to accept returns of Digital Aquatics, Neptune Systems, Vertex Aquaristik, Aqua Illumination (AI), EcoTech Marine, GHL, or Seneye products once the manufacturer's packaging seals have been broken.
Marine Depot is an authorized reseller for every product we carry. That means when you buy aquarium supplies from us, your products are not only backed by our own 60-day return policy, they also carry full factory warranties, where applicable. Some items have a 1-year warranty, others have limited lifetime warranties. Warranty coverage varies from manufacturer to manufacturer, so please read the product description of the item(s) you are considering thoroughly for details or contact us if you have warranty questions.
Learn More About Returns
Rack up reward points to earn discounts on future purchases! You can earn reward points by creating an account, writing reviews, referring friends, subscribing to our newsletter, buying products, and more!
- Earn 5 reward points for every $1 you spend to get 5% cash back
- Earn 1 reward point for every $1 you spend to get 1% cash back
Abyzz, American Marine, AquaIllumination, AutoAqua, CoralVue, Digital Aquatics, EcoTech Marine, Giesemann, GHL, Hanna Instruments, Hydor, IceCap, Innovative Marine, Iwaki, Kamoer, Kessil, Klir, Korallen-Zucht, Maxspect, Mur-lok, Nano Box, Neptune Systems, NYOS, Oceanbox Designs, Pax Bellum, Radium, Red Sea, Reef Glass, Reef Octopus, Seneye, Somatic, Tunze, Vertex Aquaristik, and Waterbox Aquariums
You can also get bonus reward points by purchasing select items during special sales and promotions.
Learn More About Rewards