Mon-Thurs 7am-5pm PST
Fri 7am-4pm PST

Questions about products, orders, shipping?
Contact us by call or email

Regen Fx Media - Advanced Resin Regeneration Kit - Blue Life USA - 250 mL


Item #: BL00357

In Stock

Regen Fx is a simple solution for regenerating Blue Life USA’s Blue Fx Regenerable Resin product line.


Adding the full contents of Regen Fx into ½ gallon of RO (Reverse Osmosis) water, or other clean drinking water type, gives you the proper solution to use when regenerating any of the regenerable resins that are offered by Blue Life USA: Phos Fx, Nitrate Fx, Organic Fx, and Softener Fx.


Once Regen Fx is diluted into ½ gallon of water, it takes only 4 hours, or for best results, allow bags of Fx resins to be soaked overnight, and they are renewed to be used again.


Regen Fx is totally safe and non-toxic to use. Being a saline-based product, it can dry out sensitive skin. It is recommended to avoid long contact or wash hands after each contact and use a hand lotion to avoid developing dry skin.


When soaking Fx resins, it is recommended to massage the resin bag often to make sure all resins inside the bag are exposed to the water contact which ensures a good rinsing.


Each Regen Fx is best for a one time use and can be easily disposed of without any concern


  • For use with regenerable resin medias
  • Allows for repeat use of products
  • Non-toxic
  • Safe to use 
  • Completely natural

Instructions and Guidelines:

It is recommended that you use rubber or latex gloves to protect your hands from drying out after long periods of contact once product is in solution. Empty contents into 1/2 gallon/ 2 Liters of clean drinking water or other RO/DI treated water. Stir occasionally for 3-5 minutes or until completely dissolved. Remove Blue Life USA media bag (Phos Fx, Organic Fx, Nitrate Fx, Softner Fx) from your filtration canister and
rinse with clean drinking water or RO/DI treated water for 1 minute while massaging gently.

Rinsing helps to remove any solids that may have entered the media bag. After rinsing, place media bag into your ½ gallon regeneration solution and allow to soak for a minimum of 1 hour (for best results soak overnight), frequently massaging media bag gently with your hand. Rinse media bag with clean drinking water or RO/DI water for up to 1 minute. Return media bag into your filtration canister and resume normal operation. Dispose of regeneration solution into your sink or toilet—it is completely safe to pour down your sink drain. Do not allow your media bag to dry out or it will become non-usable.


**May regenerate up to 4 bags of any Blue Life Resin Media provided each bag has adequate contact with the ½ gallon of mixed solution. Blue Life regenerable resins may be regenerated 6 or more times. Discontinue using regenerated resin if you see decreased performance.

Manufacturer information

Blue Life USA Aquarium Supplies
Blue Life USA is committed to providing the highest quality aquarium products available. Their staff has a combined 100 years of experience as hobbyists, retailers, industry professionals, chemists and veterinarians. Blue Life USA’s vision is to enhance the enjoyment of aquarium hobbyists by offering the next generation of products that will help create and maintain thriving, vibrant and crystal clear aquariums. With an unyielding dedication to integrity and responsibility, Blue Life USA raises the bar for this generation and future generations of aquarium product manufacturers.

5 Stars


Reviewed on
April 21, 2019

Yes, I would recommend this.

Resin Regeneration Kit - Blue Life USA - 250

Pros: Simple to use,Cost effective,

Cons: none yet

I soaked my bags of media overnight mixing it up a few
times put it back to work. Not only did it look like new it worked like New.

Was this review helpful? 0 0

We use cookies to provide a personalized site experience. By continuing to use & browse this site, you agree to our Privacy Policy.