1-714-385-0080

Mon-Thurs 7am-5pm PST
Fri 7am-4pm PST

Questions about products, orders, shipping?
Contact us by call or email
customercare@marinedepot.com

Trigger Systems Triton20C v2 Cube Sump - 20 inch

$428.99 

Starting at $39/mo with . Learn more


Item #: 6E6969

Free Upgraded Shipping!


Temporarily Out of Stock


Trigger`s Triton Sumps are specifically designed for reefs that use the Triton Method. 

The refugium section in the Triton v2 Sumps are tailored to be larger than many other sumps, as the Triton Method would require this section to be up to 10% of your display tank`s water volume.

Filter sock holders are also included in the sump for the mechanical filtration, helping clear up the water column from any large particles, however, are optional for use when employing the Triton Method.

3 Main Sections:

The Triton Sump has 3 main sections where the water enters flowing into the large refugium, on to the protein skimmer section, and the return section.

  • The large refugium is fed by dual inputs that hold 4" filter socks per input and flows through the adjustable overflow wall into the next chamber.
  • The protein skimmer may sit in this section for dissolved organics to be extracted from the water column, and then flowing to the media platform, before returning to the display.
  • The return pump section houses the heart of your system, pumping the filtered water back up to the main display.

Overview:

1" Inputs: With two main 1" drain fittings and pipe extensions in the refugium section, the included 4" filter socks can be used if needed to polish the water.  These drain fittings permit PVC pipe to be used during installation.

The additional 1" drain fitting can be installed in the skimmer or return pump section and is typically used as an emergency drain, or it can be plumbed into the return.

Refugium Lid: The provided lid, made from clear polycarbonate, helps reduce evaporation and noise, while the recessed bracing allowing the lid to sit flush with the surface, for a cleaner look.

Next to the lid is a cutout notch in the bracing that will accommodate different refugium lighting options.

Cable and Hose Organizer: Keep the cords and hoses tidy with the two provided holders, located above the probe holders and return section

Probe Holder: Four probes can be installed in the countersunk holder, with one larger probe holes for larger probes.  O-rings are also provided for added probe support.

Quick Connect Hose Input Fittings: Located in the top bracing of the sump, these 1/4" connections allow tubing for dosing or the ATO to be implemented.

Each fitting has an extension pipe that hangs down so that drops may be viewed entering the system, for finer tuning and for signs that the dosing lines are not clogged.

Media Platform: Between the skimmer and the return pump section, media bags may be placed on the provided platform, while the foam filter block reduces bubbles and particles returning into the main display.

Algae Blocker: The various algae that can be used in the refugium can come in different shapes and sizes.  The Algae Blocker helps reduce the probability of the algae escaping or clogging the overflow teeth, allowing water to flow under the blocker while the algae floats at the surface.

Adjustable Water Level: The water level in the skimmer section can be adjusted from 7" to 9.5" to accommodate the different suggested running depths of skimmers.  The two bolts hold the wall in place and can be loosened to precisely adjust the desired height.

The refugium water level is also adjustable from 8 to 11.5", so that the flow going through the sump may be fined tuned, as the Triton Method requires high flow through the sump.

Features:

  • Clear polycarbonate refugium lid
  • Algae blockers keep algae put, and light from escaping
  • Independent water level control in refugium and skimmer section
  • Dual 1" drain hose connections with 4" filter socks
  • Extra 1" removable drain input, configurable for skimmer or return section
  • Engraved water level indicators
  • Adjustable baffles
  • Media platform with foam filter block
  • Probe holders
  • Quick connect dosing tube holders
  • Cable holders for wire clean up

Specifications:

What`s Included:

  • For aquariums up to = 100 gallons
  • Dimensions = 20" long x 20" wide x 15" high
  • Refugium Section = 19.5" x 9.25" (~9 gallons)
  • Skimmer Section = 10" x 11"
  • Return Pump Section = 6" x 10"
  • Total Water Volume = 24.3 gallons
  • Refugium Water Level = 8" to 11.5" adjustable
  • Skimmer Water Level = 7" to 9.5" adjustable
  • Drain Input Fittings = 1" (x3) – 2 main, 1 configurable
  • Filter Sock = 4" (x2)
  • 1 x Trigger Triton20C-v2 - 20 Inch Sump
  • 4 x Push-connect Fittings with Tubing
  • 4 x Probe o-rings
  • 1 x Polycarbonate splash shield

5 Stars


vo

Reviewed on
May 29, 2020

Yes, I would recommend this.

AWESOME SUMP!!!

Pros: Lots of room for all the toys, very well made, Looks great!

Cons: None

This sump has EVERYTHING!! :Lots of room in each compartment.. can customize the compartments with the extras this comes with.
Customer service is excellent and very fast.. great quality product that is well made and sturdy. Even if you don't want to do the Triton method you have the option with this sump to do so. Very happy with it.

Was this review helpful? 0 0


vow

Reviewed on
May 29, 2020

Yes, I would recommend this.

Awesome Sump!!

Pros: Well made, easy to set up, lots of options!!

Cons: None that I can see

This sump has EVERYTHING!! Every option you want and need. Very well made.. Great quality product.
Customer service is so fast and helpful.
So many great things this sump comes with, they thought of everything.

Was this review helpful? 0 0


vo

Reviewed on
May 29, 2020

Yes, I would recommend this.

TRITON V2 CUBE 20C

Pros: Has every option you can think of

Cons: None that I can see

This sump has everything you will ever need!! Great design, so many features..great quality product.
Customer service is even better!!
A+ sump
Can't go wrong with this design. :)

Was this review helpful? 1 0