Tunze® Wavebox 6206 (Nano)/6212/6215/6212.50 Wavemaker

Tunze® Wavebox Wavemaker
TUNZE® Nano Wavebox and Wavebox are suitable wave generators for all reef biotopes. They produce oscillating waves which produce water movement almost identical to reef zones. Nano Wavebox and Wavebox are controlled by means of Wavecontroller 6091, which utilizes the principal of resonance frequency to create wave motion. The resonance frequency is set on the Wavecontroller; it is the frequency, at which the waves can reach the maximum height in the aquarium. At very little power consumption, an enormous water movement is produced very efficiently. All of the water in the tank is in movement, which means that water also laps around areas behind stones.

In large tanks, a Wavebox 6212 and a Wavebox Extension 6212.50 should be fitted, the latter being a Wavebox 6212 without Wavecontroller 6091 which is used as an extension. Nano Wavebox and Wavebox can be fitted in any corner of the aquarium.

A special Wavebox pump is used as a wave generating pump, which belongs to the family of the Turbelle ® stream pumps. It pumps the water out of the box at a high speed. The Wavecontroller 6091 stops the pump after a short time; the water returns into the housing of the Wavebox.

The Wavecontroller 6091 controls the pump in such a way that switching on and off corresponds to a certain frequency. The frequency is determined when the unit is set up, which then remains constant. Given a strong growth of coral, this frequency should be re-adjusted after some time. In order to ensure night-mode operation, the Wavecontroller 6091 has been fitted with a photoelectric cell: In this case the Wavebox will be set to standstill for the night. The Foodtimer integrated in the Wavecontroller switches the Wavebox off when food is dispensed. The wave generation is interrupted for about 7 to 9 minutes to permit feeding. The break in wave movement whilst the fish are fed ensures that no food gets into the stone structures and that the fish can feed undisturbed by the wave movement.

Click Here for more information
Tunze Wavebox 6212/6212.50 Wavemaker
Item #DescriptionPrice 
TZ61055Tunze Turbelle Safety Connector 6105.500$54.20
Turbelle Magnet Holder
Tunze Magnet Holder (6080.50, 6200.50)Magnetic holder for all Turbelle pumps. The magnetic holder permits uncomplicated mounting of components at any position on the aquarium pane; encapsulated construction; requires seconds only for attachment; two models for glass thickness of up to 12mm (0.47") and up to 19mm (0.74").

Note Two (2) magnet holders are required per wavebox.